EB-115 Bass Amplifier

Description

EB-115 BASS AMPLIFIER “FRONT’

1. Input – Plug your bass in here.
2. Input Select – Switch between active and passive inputs.
3. Tuner Out – Connect to instrument tuner.
4. Gain – The gain control adjusts the volume of the preamp section.
5. Preamp Clip – The preamp clip LED will light whenever the preamp, tone section or output buffer each clipping.
6. Aural Enhancer – Control the aural enhancer frequencies of your sound.
7. Bass – Control the lower frequencies of your sound.
8. Middle Level – Control the middle frequencies of your sound.
9. Middle Frequency – Use this control to adjust the frequencies of middle range (200Hz-800Hz)
10. Treble – Control the treble frequencies of your sound.
11. Transparency – Control the transparency frequencies of your sound.
12. Effect Blend – The effects blend control mixes the signal coming from your instrument with the sound coming from your effect.
13. Limiter Active – It is used to protect the speaker, if the signal is too strong, The limiter will clip the sound.
14. master –  Adjust the the overall volume of the amplifier.
15. Phones – This is a headphone’s output jack.
16. Power – Turn on and off the amplifier

EB-115 BASS AMPLIFIER “BACK”

1. Fuse – This will protect your amp, always replace with the correct value, as stated on the back.
2. AC Input – Connect your power cable here.
3. Balanced Out – Direct inject output for mixer or recording device.
4. Effects send – Connects the amplifier to the input off an effects unit.
5. Effects Return – Connects the amplifier to the output off an effects unit.