Description
- Input – (1/4″ Mono) Use this jack to connect your guitar to the amplifier.
- Clean Level – Use this control in conjunction with your instrument’s volume controls to adjust the output level of clean.
- Clean LED – This LED illuminates when the clean is selected.
- Channel Select – Switch for selecting Clean/Drive channel (push/push).
- Drive LED – This LED illuminates when the drive is selected.
- Drive Gain – Adjusts the loudness of the drive channel in conjunction with the gain control.
- Drive Level – Adjusts the amount of gain and overdrive in the drive channel, in conjunction with the drive volume control.
- Bass – Use this control to boost or cut the low frequency within +/- 15dB.
- Mid Knob – Use this control to boost or cut the mid frequency within +/- 15dB.
- Mid Frequency Knob – Use this control to adjust the frequency of middle range (200Hz – 5KHz). Turn this knob clockwise to raise the mid frequencies and counter clockwise rotate the knob to lower the mid frequencies
- High Knob – Use this control to boost or cut the high frequency within +/-15dB.
- Chorus – Use this control to adjust the speed of chorus effect, when the control at OFF position, the chorus effect is not in use.
- Delay – Use this control to adjust the feedback and time of delay effect, when the control at OFF position, the delay effect is not in use.
- Master Volume – Controls the overall signal level of the amplifier. This jack allows you to preset the output level of both the clean and overdrive channel.
- Mic Input – (1/4″ Mono) Use this jack to connect a microphone to the amplifier.
- Mic Level – Use this control to adjust the input level of microphone.
- Aux Input – (1/4″ Stereo) Use this jack to connect CD player, drum machine etc.
- Stereo Input – (1/8″ Stereo) Use this jack to connect Mp3 player for jamming and practice.
- Headphone – (1/4″ Stereo) This is a headphone’s output jack.
- Power Switch – Use the switch to turn the amplifier on and off.
Reviews
There are no reviews yet.